Loading...

UAN 26+4S

Liquid nitrogen fertilizer “UAN 26+4S”
Urea ammonium nitrate solution with sulfur (26% total nitrogen + 4% sulfur)

TU U 20.1-36584168-006:2019

Sales/packaging terms: EXW, FCA, retail packaging 1 L

Delivery terms: own transport across Ukraine or self-pickup

UAN 26+4S is a concentrated liquid nitrogen fertilizer containing 24–26% total nitrogen in three forms: ammonium (NH₄⁺) — moderately retained in soil, provides stable nutrition; nitrate (NO₃⁻) — readily available but susceptible to leaching; amide (NH₂) — gradually mineralized, offering prolonged action. Additionally, it contains 4% sulfur in the sulfate form (SO₃), which is critical for:
  • amino acid and protein synthesis;
  • activation of nitrogen metabolism;
  • enhanced nitrogen uptake efficiency.
The fertilizer is fully water-soluble, contains no mechanical impurities, and has a neutral to slightly alkaline pH (~7). It is suitable for a wide range of soil types, including acidic, sandy loam, and grey podzolic soils.

Recommended use:

  • base application — before sowing with incorporation into soil;
  • pre-sowing application — can be mixed with other fertilizers;
  • top dressing during vegetation — for cereals, corn, rapeseed, and industrial crops;
  • foliar application — in diluted concentrations (7–12%);
  • fertigation — especially effective in intensive vegetable cultivation.

Limitations and warnings:

  • avoid application during hot weather or high solar activity;
  • do not apply to wet foliage without dilution;
  • crystallization temperature –14…–17 °C;

Appearance and color: Light yellow liquid with a characteristic odor of its components.

Density, g/cm³ 1,25 – 1,29
Alkalinity, % 0,01 – 0,5
Mass fraction of ammonium nitrate, % 18 – 26
Mass fraction of urea, % 29 – 37
Mass fraction of water, % 40 – 20
Mass fraction of sulfur, % 3 – 4
Mass fraction of total nitrogen, % 24 – 26
  • store in airtight, sealed containers such as IBC tanks, corrosion-resistant reservoirs, or tanker trucks;
  • storage area must be protected from direct sunlight, precipitation, and temperature extremes;
  • optimal storage temperature: +5 °C to +25 °C;
  • Crystallization temperature: –14 °C;
  • prevent contamination with foreign matter (soil, crop protection products, pesticides, water);
  • do not discharge into sewers or water bodies — disposal must comply with current environmental regulations.

Not recommended: do not store below 0 °C or in contact with unprotected carbon steel — risk of crystallization or stratification due to sulfate content.

Guaranteed shelf life: when stored and transported under proper conditions, the product remains usable for 6 months from the production date. After the expiration of the guaranteed storage period, the fertilizer must be tested for compliance with technical requirements before use.

Crop Application period / rate (kg/are) Special application conditions
Pre-sowing cultivation Spring regrowth stage / 2–3 leaf pairs*, **start of vegetation Before stem elongation, fertilization* Heading stage
Cereal сrops
Winter wheat, winter rye - 1,8-2,4 - - spring regrowth, thinned crops
- 0,9-1,2 - - spring regrowth, optimal stand density
- - 0,9 in a 1:2 water solution - before stem elongation/when combined with herbicide application – dilute 1:3 or 1:4
- - - 0,3 Heading stage / apply as needed using a 1:2 water solution
Millet, buckwheat 0,9-1,4 - - - before cultivation prior to sowing
Spring wheat 1,86 - - - for basic tillage or cultivation on typical black soil
2,74 - - - for main tillage or cultivation on leached chernozems and dark gray leached soils
Spring triticale 1,86 - - - in areas with insufficient moisture, apply entirely during pre-sowing cultivation.
Spring barley 1,8-2,4 - - - applied prior to autumn plowing
1,2-1,8 - - - during spring cultivation
Maize 1,8-3,0 - - - before autumn plowing / before spring cultivation
- 0,9** - - fertilization between rows before the 3–5 leaf stage, under adequate moisture conditions
Oats 1,0-1,8 - - - Increase the application rate by 30% after cereal precursors
Peas 1,15 - - - before pre-sowing cultivation
Industrial crops
Sunflower 1,7 - - - apply during pre-sowing cultivation if nitrogen fertilizers were not applied, or in autumn during plowing
- 1,0* - - apply between rows with working into the soil in the phase of 2-3 pairs of true leaves
- 0,3-1,0* - - or foliarly with a solution with water in a ratio of 1:3
Soybeans 0,9 - - - before pre-sowing cultivation
Sugar beet 2,7 - - - before pre-sowing cultivation
- 0,9 - - Foliar application at 1:3 dilution with water (if necessary, in the phase of 2-3 pairs of true leaves - before the phase of leaf closure in rows)
Oilseeds
Winter rape 1,4 - - - for pre-sowing tillage, if nitrogen fertilizers were not applied or in the fall for plowing
- *2.4-3.7 in a solution with water 1:2 - - *when forming a leaf rosette (foliar)
- - *1.2-2.4 in a solution with water 1:2 - in the phase of stem formation (foliar)
Spring rapeseed 1,4 - - - for pre-sowing cultivation
- *2.4-3.7 in a solution with water 1:2 - - *when forming a leaf rosette (foliar)
- - *1.2-2.4 in a solution with water 1:2 - *in the phase of stem formation (foliar)
Oil flax 1,2 - - - before pre-sowing soil cultivation
Vegetables
Tomatoes 3,0-4,3 - - - during plowing
2,4 - - - if no other nitrogen fertilization is planned
1,2 - - - if other nitrogen fertilizers are planned
Peppers 3,7-4,3 - - - during plowing
2,4 - - - if no other nitrogen fertilization is planned
1,8 - - - when planning fertilization with other nitrogen fertilizers
Zucchini 3,0-3,7 - - - during plowing
2,4 - - - if no other nitrogen fertilization is planned
1,5 - - - if other nitrogen fertilizers are planned
Cucumber 2,6-3,1 - - - during plowing
2,1 - - - if no other nitrogen fertilization is planned
1,5 - - - if other nitrogen fertilizers are planned
Aubergine 2,4-3,7 - - - during plowing
1,8 - - - if no other nitrogen fertilization is planned
0,6 - - - when planning fertilization with other nitrogen fertilizers
Potatoes and other root crops
Potatoes, table beets, carrots, radishes 2,3 - - - apply to soil before pre-sowing cultivation. Can be used prior to sowing operations
Fruit trees and berry trees
Apple tree - 2,9 - - top dressing in the spring before flowering in a solution with water 1:2
Pear tree - 2,1 - - spring fertilization before flowering
Cherry tree - 3,5 - - spring fertilization before flowering
Raspberry 2,7 - - - spring fertilization before the start of vegetation
Wild Strawberry/Garden Strawberry 1,8 - - - spring fertilization before vegetation starts, using a 1:2 water solution
Flowers and lawn grasses
Rose 2.3 in a solution with water in a ratio of 1:2 first spring fertilization before vegetation (sap flow). Apply by watering under the bush at temperatures above 10°C, in the morning or evening, in calm, dry weather
second fertilization at the bud emergence stage, but before flowering. Apply by watering under the bush at temperatures above 10°C, in the morning or evening, in calm, dry weather
Annual and perennial grasses 1,9 - - - before cultivation prior to sowing

Note: apply UAN at an air temperature not exceeding +15...+18 C. Apply after sunset (during the daytime, drops of the solution can create a lens effect, burning leaf tissue). Do not apply during rain and dew. Work with a large drop so as not to cause leaf burns
Ім'я *
Номер телефону *
Область